Filter
Top Products
Appendix A Screen Details
> A.35 Set Syslog
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
800
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.35 Set Syslog
A.35.1 Set Syslog (Initial) Screen
On this screen, the Syslog information registered in the ETERNUS DX400/DX8000 series is dis-
played. When changing settings, specify the appropriate values on this screen.
■ Syslog Function
● Setting item
• Syslog Function
- Syslog Function
Select whether to enable or disable the Syslog function.
The default setting is "Disable".
• Enable: Syslogs specified in the "Output Log Type" are sent to the Syslog server.
• Disable: Syslogs are not sent.
■ Common Settings
● Setting item
• Use LAN Port
Select the device LAN port used for transferring Syslogs from the list box.
The default setting is "USER".
- USER: USER port
- REMCS: REMCS port
• Output Log Type
When "Enable" is selected in the "Syslog Function" field, select the type of Syslogs to be sent
to the Syslog server using the checkbox.
The initial status is "Not selected".
- Informational:
The following events are sent to the Syslog server:
• Configuration settings operation and maintenance information operation such as
deleting logs using the ETERNUSmgr or ETERNUS SF Storage Cruiser
• Logging on and logging off from the ETERNUSmgr
- Warning:
Warning events in the notifications of the REMCS and SNMP are sent to the Syslog
server.
- Error:
Error events in the notifications of the REMCS and SNMP are sent to the Syslog server.
The Syslog of the event that indicates the changing of the Syslog setting
is sent to the Syslog server regardless of whether the "Syslog Function"
has been enabled or disabled, or the "Output Log Type" checkbox is
selected.