Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
311
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
(3)Click the [OK] button.
→ Returns to the [Set CA Parameters (Initial)] screen.
■ For FCLINK detailed settings
(1)Select the following items and click the [Set] button.
- Transfer Rate
• 1Gbit/s
Sets the transfer rate to 1Gbit/s.
This is used when connecting GS and FCLINK directly.
• 2Gbit/s
Sets the transfer rate to 2Gbit/s.
This is used when connecting GS and FCLINK via FCLINK switch.
- Port Mode
Select a port mode for FCLINK Port.
Note that "CH" port is not supported and cannot be selected.
→ The [Set CA Parameters (FCLINK Detailed Settings Check)] screen appears.
(2)Click the [OK] button.
→ The [Set CA Parameters (Updating Configuration Information)] screen appears.
When the process is successfully completed, the [Set CA Parameters (FCLINK
Detailed Settings Result)] screen appears.