Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
135
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Change the Assigned Domain of the Host Response, and click the [Set] button.
■ To set using [Set Range]
(1)Enter the first and last Host Response numbers.
(2)Select the domain to assign the specified range of the Host Responses from the list
box.
(3)Click the [Execute] button.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
• The domain for "Host Response No.: 0x000 (Default)" is fixed to
"Share". The domain for "Host Response No.: 0x000 (Default)"
cannot be changed to other domains.
• If the [Execute] button is clicked in the following c onditions, an
error screen appears.
- Both or one of the "From: Host Response" or "To: Host
Response" field is blank
- Characters other than hexadecimal numbers are spec ified in
the "From: Host Response" or "To: Host Response" field
- There are no Host Responses where the Assigned Domain
can be changed in the range specified by the "From: Host
Response" and "To: Host Response"
• The Set Range setting is performed when there is at least one
Host Response that satisfies all the conditions described in
"Conditions in which a Host Response can Assign to Domain/
Change Assigned Domain" (page 109).
• The Set Range setting is applied only for the Host Response that
can be changed to the selected domain. Refer to "(Supplement)
Changing domain of a Host Response" (page 713) for Host
Responses in which the domain can be changed.