Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
181
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
7 Click the [OK] button.
→ The [Create Logical Volume (Updating Configuration Information)] screen appears.
When the updating completes, formatting starts. When starting of the format process is
complete, the [Create Logical Volume (Creating Complete)] screen appears.
8 Click the [OK] button.
→ Returns to the [Menu] screen.
When the volume name is specified, the [Create Logical Volume
(Setting Logical Volume Name)] screen appears after the [Create
Logical Volume (Updating Configuration Information)] screen.
• When a problem occurs during the setting process of volumes, an
error screen appears.
• After creating volumes is complete, the new volumes are
automatically formatted. When exceeding the maximum capacity
of volumes that can be formatted concurrently, a message to that
effect appears. Wait until the current format process is complete,
and then format the volumes that failed to be formatted. When
volumes fail to be formatted, "Error" or "Not formatted" is
displayed as the result of the format starting process.