Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
145
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
This section explains procedures to create RAID Groups.
Procedure
1 Click [Create RAID Group] under the RAID Management in the [Configuration]
menu.
→ The [Create RAID Group (Initial)] screen appears.
2 Select the information of the RAID Group to be created, and click the [Set]
button.
Refer to "A.10.1 Create RAID Group (Initial) Screen" (page 716) for details about setting
items.
Specify the following items.
• RAID Group Name
Input a name for the RAID Group to be created.
• RAID Level
Select RAID Level for the RAID Group to be created.
• Resource Domain
Select the Resource Domain for the RAID Group to be created.
The "Resource Domain" item is displayed when logged on the ETERNUS DX400/
DX8000 series, in which the Resource Domains have been registered, using a Total
Administrator account.
• Controlling CM
Select the Controlling CM-CPU for the RAID Group to be created.
Create volumes using the [Create Logical Volume] function after creating a
RAID Group.
In the following cases, a RAID Group cannot be created. When a
message to that effect is displayed, return to the [Menu] screen by
clicking the [OK] button.
• When there is no disk to configure a RAID Group.
• When the number of existing RAID Groups has already reached
the maximum number that can be created.