Filter
Top Products
Appendix A Screen Details
> A.19 Set Host World Wide Name(s)
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
758
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• Manual Input
- WWN
Directly input WWN, which can be connected to a CA, in the text box using hexadecimal
numeric (0–9, A–F, a–f) 16 digits. However, all "F(f)" and all "0" are not allowed.
• Resource Domain
Select Resource Domain to assign the WWN from the list box.
Shared Resources (Share) and Resource Domains (0x00 – 0x07) registered in the
ETERNUS DX400/DX8000 series are displayed as the selection items in the list box. If a
Resource Domain name has been registered, the Resource Domain name is also displayed.
The default setting is "Share".
• Host Response
Select a Host Response to be added to each WWN from the list box. When you click the
[Host Response] link, the Host Response can be displayed.
- Default: Name:
The [Default] Host Response is displayed. If the Host Response name is registered, its
name is also displayed in the list box.
- Host Response (Number: Name):
A Host Response identification number is displayed. If the Host Response name is
registered, its name is also displayed in the list box.
(Number = 0x01 – 0xFF)
When Resource Domains are not registered, or when logged on using a
Resource Domain Administrator account, the "Resource Domain" item
is not displayed.
When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, the Host Responses displayed in the list box differ
depending on the current u ser account. When logged on using a Total
Administrator account, all the Host Responses registere d in the
ETERNUS DX400/DX8000 series are displayed. When logged on using
a Resource Domain Administrator account, only the Host Responses
that are assigned to the relevant Resource Domain, and only the Host
Responses that are assigned to the Shared Resource, are displayed.