Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
409
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 After changing the items, click the [OK] button.
Items which can be changed are as follows.
• Host Response Name
• Command Time-out Interval
• Byte-0 of Inquiry Response
• Inquiry VPD ID Type
• Inquiry Standard Data Version
• Reservation Conflict Response for Test Unit Ready
• Host Specific Mode
• Asymmetric / Symmetric Logical Unit Access
• LUN Mapping Changes
• LUN Capacity Expansion
• Vendor Unique Sense Code
• Sense Code Conversion Pattern
→ The [Set Host Response (Initial)] screen appears.
The changed Host Response information is updated to the [Host Response List] (Not
updated in the ETERNUS DX400/DX8000 series yet).
Repeat Steps 2 to 3 to change more Host Responses.
When the [OK] button is clicked after entering characters other than
alphanumeric characters, or entering already registered Host
Response Name for the Host Response Name entry, an error screen
appears.