Filter
Top Products
Chapter 6 Settings Menu
> 6.7 Setting Encryption
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
589
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
4 Click the [OK] button.
→ Returns to the [Menu] screen.
End of procedure
6.7.1.2 Change Encryption Mode
The procedure to change or disable the Encryption Mode is described below.
(Change "Fujitsu Original Encryption" to/from "AES") or
(Change "Fujitsu Original Encryption" or "AES" to "Encryption Mode invalidity")
Procedure
1 Click [Set Encryption Mode] under the Setting Encryption in the [Settings] menu.
→ The [Set Encryption Mode (Initial)] screen appears.
2 Change an Encryption Mode, and click the [Set] button.
→ The [Set Encryption Mode (Check Setting)] screen appears.
In the following cases, this function cannot be used.
Click the [OK] button to return to the [Menu] screen.
• When the storage system already contains encrypted volumes.
• When the storage system is encrypting volumes.
• When the memory capacities installed in each of the device's
CMs are not matched.