Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
239
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Click the [OK] button.
The volume that is being mapped is displayed with a yellow background.
→ The [Delete Logical Volume (Updating Configuration Information)] screen appears.
When the process is successfully completed, the [Delete Logical Volume (Complete)]
screen appears.
- One field or both fields of the Range (From and/or To) has/
have not been entered
- Characters other than numeric or alphabetic characters [a] –
[f] or [A] – [F] are specified in the range field
- There are no deletion target volumes in the range (From and
To)
• An error screen appears when an error occurs during volume
deletion and/or mapping deletion.
Click the [OK] button to return to the [Menu] screen.
• When Thin Provisioning Volumes (TPV) are deleted, the physical
allocating area of the relevant TPV will be formatted. When
exceeding the maximum capacity of volumes that can be
formatted concurrently, a message to that effect appears. TPV
that fails to be formatted cannot be deleted. Wait until the current
format process is complete, and then delete the TPV that failed to
be formatted. "Readying" is displayed for "Status" field of the TPV
for which formatting failed in the Logical Volume List.