Filter
Top Products
Chapter 8 Remote Support Menu
> 8.2 Set
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
630
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
In the following cases, an error screen appears.
• When clicking the [Set] button while the required items (items with
* mark) have not been set
• When clicking the [Set] button with wrong values entered
• When clicking the [Import] butt on while both the [Customer
Information File] and [Communication Environment Information
File] have not been set.
• When the selected "Customer Information File" or
"Communication Environment Information File" is wrong.
• When the "Use LAN Port" is [USER], and the broadcast address
of the USER port and the IP address for the proxy server, SMTP
server, POP server, or HTTP server are the same.
• When the "Use LAN Port" is [REMCS], and the broadcast
address of the REMCS port and the IP address for the proxy
server, SMTP server, POP server, or HTTP server are the same.
• When the local host address and the IP address for the proxy
server, SMTP server, POP server, or HTTP server are the same.
• When the IP address for the proxy server, SMTP server, POP
server, and HTTP server are not Class A, B, or C.
• Usually, there is no need to change the monitoring timeout, retry
count, and other timer settings. If changing these settings, click
the [Detail] button.
• For the customer information not to be retained in the device, set
[be deleted] at the top. The customer information will then be
deleted from the device after it has been transferred to the
REMCS center.