Fujitsu DX400 Computer Drive User Manual


 
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
226
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
The following operations/settings are available on this screen.
Check Migration Progress
Check the status and progress of the RAID Migration
Stop Migration
Stop the selected RAID Migration and delete the work volume.
Procedures for each operation are described below.
5.2.13.1 Check Migration Progress
Procedure
1 Click [Progress of RAID Migration] under the RAID Management (or Thin
Provisioning Management) in the [Configuration] menu.
The [Progress of RAID Migration (Initial)] screen appears.
2 Check the status and progress.
Clicking the [Refresh] button updates to the latest state.
When the device is busy (retrieving progress data) or when migration
is not performed, a message to that effect is displayed without
showing the initial screen.
When the status is busy, wait until processing is done. When the
progress data is retrieved, the [Progress of RAID Migration (Initial)]
screen appears.
When migration is not performed, click the [OK] button to return to
the [Menu] screen.
If the migration destination is TPP, and the used capacity of th e
relevant TPP is in alarm state (exceeding "Caution" or "Warning"
threshold) after the migration has been completed, a message to
recommend expanding the relevant TPP capacity appears.
When the migration is complete and no RAID Migrations are in
progress, a message to that effect appears. Click the [OK] button
to return to the [Menu] screen.