Filter
Top Products
Chapter 6 Settings Menu
> 6.6 Remote Advanced Copy Configuration
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
585
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.6.4 Check Advanced Copy Path
This function checks whether or not the path configuration between two connected devices is
appropriately set as the path in use.
The Advanced Copy Paths may be checked as follows:
Procedure
1 Click [Check Advanced Copy Path] under the Remote Advanced Copy
Configuration in the [Settings] menu.
→ The [Check Advanced Copy Path (Initial)] screen appears.
2 Click the [Box ID] link to check the path status.
→ The [Check Advanced Copy Path (Path Status)] screen appears.
When logged on using a Resource Domain Administrator account, the
[Check Advanced Copy Path] menu is not displayed.
This function checks the path status by transmitting commands to the
Advanced Copy path between devices. If you execute the [Set Advanced
Copy Path] function, be sure to check the path status using the [Check
Advanced Copy Path] function.
If the Advanced Copy Path is not set, a message to that effect
appears. Click the [OK] button to return to the [Menu] screen.