Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
437
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5 Click the [OK] button.
→ Returns to the [Set IOA Mapping (Initial)] screen.
End of procedure
5.4.11 Change RA Mode
This function changes the RA mode (CA: Channel Adapter, RA: Remote Adapter, or RFCF-RA)
for each specific CA Port.
If the CA type is the same, the settings can be copied.
The only CA that can change RA Mode is FC.
Clicking the [LCU #] link on the [Set IOA Mapping (LCU Display)]
screen displays IOA Mapping List in another window.