Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
235
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
8 Click the [Set] button to update the setting in the ETERNUS DX400/DX8000
series.
→ The [LUN Concatenation (Check Setting)] screen appears. The added volumes are
displayed with a yellow background.
9 Concatenate the volume by clicking the [OK] button.
→ The [LUN Concatenation (Updating Configuration Information)] screen appears. After
the process is successfully completed, the [LUN Concatenation (Result)] screen
appears.
If the [Set] button is clicked when the total capacity of the existing
volume and added volumes exceeds 32 (TB), an error screen
appears.
The [LUN Concatenation] function formats the new volumes to be
added. When exceeding the maximum capacity of volumes that can
be formatted concurrently, a message to that effect appears. Delete
the work volume (TmpOpen volume) created during the LUN
Concatenation process. Wait until the current format process is com-
plete, and then perform the [LUN Concatenation] function again.
The [LUN Concatenation (Result)] screen appears only when the
creating new volumes and format starting process are successfully
completed. Formatting progress can be checked either using the
[Volume List] function or the [RAID Group List] function.