Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
309
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ For RFCF-RA detailed settings
(1)Select the following items and click the [Set] button.
- Connection Topology
Select a connection topology for the RFCF-RA Port.
Select Fabric Connection.
- Transfer Rate
Select a transfer rate for the RFCF-RA Port from the list box.
→ The [Set CA Parameters (RFCF-RA Detailed Setting Check)] screen appears.
(2)Click the [OK] button.
→ The [Set CA Parameters (Updating Configuration Information)] screen appears.
When the process is successfully completed, the [Set CA Parameters (RFCF-RA
Detailed Settings Result)] screen appears.
RFCF-EX uses the ports in pairs. The pair port of the selected port is
automatically specified with the same settings. "Pair port" indicates
Port#0 and Port#1, or Port#2 and Port#3.
Be sure to specify [Fabric connection] for the Connection
Topology. The RFCF-RA port does not support the [FC-AL
connection].