Filter
Top Products
Chapter 5 Configuration Menu
> 5.3 Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
292
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Procedures for each operation are described below.
5.3.13.1 Checking the Progress of the Balancing TPV
Procedure
1 Click [Progress of Balance Thin Provisioning Volume] under the Thin
Provisioning Management in the [Configuration] menu.
→ The [Progress of Balance Thin Provisioning Volume (Initial)] screen appears.
2 Check the status and progress.
Clicking the [Refresh] button updates to the latest state.
When the ETERNUS DX400/DX8000 series is busy (retrieving
progress data) or no balancing of a TPV is in progress, a message to
that effect is displayed without showing the initial screen.
When the status is busy, wait until processing is done. When the
progress data is retrieved, the [Progress of Balance Thin
Provisioning Volume (Initial)] screen appears.
When no balancing of TPV is in progress, click the [OK] button to
return to the [Menu] screen.
When the balancing of a TPV has been completed and no balancing
of a TPV is in progress, a message to that effect appears. Click the
[OK] button to return to the [Menu] screen.