Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
419
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Specify the following items, and click the [OK] button.
• OS kind
Select the OS type of the host that the LCU is connected to from the list box.
• SSID
Enter SSID (Subsystem ID) for the LCU.
The number of significant figures for SSID varies depending on the OS type. When OS
type is [Fujitsu], SSID is 2 digits. Please enter 4-digit SSID with the extra "00" at the
beginning.
Fujitsu: 0x0002 – 0x00FD (significant figures: last 2 digits)
• Remote Flag
Sets Enabled/Disabled for LCU RBS mode.
→ The [Set LCU (Initial)] screen appears with the selected LCU added (Not yet set in the
ETERNUS DX8100/DX8400/DX8700). The LCU to be added is displayed with a yellow
background.
Repeat Steps 2 to 3 to add more LCUs.
When the [Add] button is clicked without selecting the additional
LCU#, an error screen appears.
• When the host is connected with multiple ETERNUS DX8100/
DX8400/DX8700, the LCU that each device is managing cannot
use the same SSID. Make sure not to set the same SSID in any
device.
• The Remote Flag is displayed only when the RFCF(RBS) license
is registered. The RBS mode can be set for 2 LCUs. However, the
RBS mode cannot be set for LCUs #0x10 to #0x1F.
• In the following cases, an error screen appears.
- When the [OK] button is clicked without selecting OS type
- When the [OK] button is clicked after alphanumeric other than
0x0002-0x00FD is entered in SSID
- When the [OK] button is clicked after an already registered
value is entered in SSID