Filter
Top Products
Chapter 6 Settings Menu
> 6.5 Eco-mode
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
511
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.5.2.1 Add Eco-mode Schedule
This section describes procedure to add Eco-mode schedule.
Procedure
1 Click [Set Eco-mode Schedule] under the Eco-mode in the [Settings] menu.
→ The [Set Eco-mode Schedule (List)] screen appears.
2 Set the following items and click the [Add] button.
• Addition Schedule No.
Specify the unused schedule number among 0x00 to 0x3F (2 digits of hexadecimal).
• Addition Schedule Name
Set the non-overlapped Schedule Name with up to 16 ASCII code characters (0x20 –
0x7E). Entering a name is not mandatory.
• Assignable Resource Domain No.
Select the Resource Domain to be assigned to the new Eco-mode schedule from the
list box.
The [Assignable Resource Domain No.] is only displayed when logged on the
ETERNUS DX400/DX8000 series, in which the Resource Domains are registered,
using a Total Administrator account.
→ The [Set Eco-mode Schedule (Set)] screen appears.
Refer to "A.29.1 Set Eco-mode Schedule (Set) Screen" (page 786)
for screen details.
• Up to 64 Eco-mode schedules can be created per device.
• When there are no free schedules, the [Add] button is not
displayed.
• If an existing schedule name is specified and the [OK] button is
clicked, an error screen appears.