Filter
Top Products
Chapter 6 Settings Menu
> 6.3 Advanced Copy Settings
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
476
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.3.7.1 Create/Change REC Buffer
This section explains procedures to create/change REC Buffer.
Procedure
1 Click [Set REC Buffer] under the Advanced Copy Settings in the [Settings]
menu.
→ The [Set REC Buffer (Initial)] screen appears.
2 Select the radio button of the unused group number in which the REC Buffer is
set, and click the [Set] button. Or select the radio button of the remote device in
which the REC Buffer is changed, and click the [Set] button.
→ The [Set REC Buffer (Set)] screen appears.
Refer to "A.27.1 Set REC Buffer (Set) Screen" (page 778) for screen details.
Clicking the [REC Disk Buffer Total Capacity] link displays a list of
REC Disk Buffers assigned to the relevant REC Buffer.