Filter
Top Products
Chapter 6 Settings Menu
> 6.6 Remote Advanced Copy Configuration
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
548
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
The following explains the procedures of [Create Advanced Copy Information.]
The following settings are available.
• Edit Path Configurations
• View Path Configurations
• Add New Storage System
• Upload Adaptor Information
• Edit Adaptor Information
• Delete Storage System
• Save Advanced Copy Path
Procedures for each operation are described below.
6.6.2.1 Edit Path Configurations
Procedure
1 Click [Create Advanced Copy Information] under the Remote Advanced Copy
Configuration in the [Settings] menu.
→ The [Create Advanced Copy Information (Initial)] screen appears.
2 Select the Path Configuration Base from the following, and click the [Execute]
button.
• None (Create New Info)
→ The [Create Advanced Copy Information (Editing Operations)] screen appears.
Move on to Step 4
.
• Saved File (Read Backup Info)
→ The [Create Advanced Copy Information (Read Path Configuration File)] screen
appears. Move on to Step 3
.
• Storage System (Get Current Info)
→ The [Create Advanced Copy Information (Editing Operations)] screen appears.
Move on to Step 4
.
The screen only displays Local Device or Remote Device, which the device
information is registered to Advanced Copy path configuration. When
creating the Advanced Copy path, register the device information by using
[Add New Storage System] or [Upload Adaptor Information] first.