Filter
Top Products
Chapter 6 Settings Menu
> 6.8 Others
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
599
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.8.2.1 Set IP Address for REMCS Port
Procedure
1 Click [Set IP Address for REMCS Port] under the Others in the [Settings] menu.
→ The [Set IP Address for REMCS Port (Initial)] screen appears.
Refer to "A.34.1 Set IP Address for REMCS Port (Initial) Screen" (page 798) for screen
details.
2 Check and change the following items, and click the [Set] button.
• IP Address
• Subnet Mask
• Gateway
• Allow same subnet access
• DNS Settings
• IP Access Settings
• Service Settings
→ The [Set IP Address for REMCS Port (Setting Check)] screen appears.