Filter
Top Products
Chapter 6 Settings Menu
> 6.5 Eco-mode
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
509
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.5.1.2 Eco-mode Stop setting
The following explains the procedure to stop the Eco-mode.
Procedure
1 Click [Set Common Eco-mode] under the Eco-mode in the [Settings] menu.
→ The [Set Common Eco-mode (Set)] screen appears.
2 Perform the common Eco-mode setting and click the [Set] button.
→ The [Set Common Eco-mode (Check)] screen appears.
3 Click the [OK] button to update the common Eco-mode setting.
→ The [Set Common Eco-mode (Updating Configuration Information)] screen appears.
After the process has successfully completed, the [Set Common Eco-mode (Result)]
screen appears.
4 Click the [OK] button.
→ Returns to the [Menu] screen.
End of procedure