Filter
Top Products
Chapter 5 Configuration Menu
> 5.3 Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
266
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.3.2 Set Thin Provisioning Pool Parameters
This function sets the thresholds for notification of a Thin Provisioning Pool shortage. There are
two thresholds for Thin Provisioning Pools: Caution and Warning.
This section describes how to set the Thin Provisioning Pool parameters.
Procedure
1 Click [Set Thin Provisioning Pool Parameters] under the Thin Provisioning
Management in the [Configuration] menu.
→ The [Set Thin Provisioning Parameters (Notification Setting)] screen appears.
Refer to "A.14.1 Set Thin Provisioning Pool Parameters (Notification Setting) Screen"
(page 735) for screen details.
• When there are no Thin Provisioning Pools registered in the ETERNUS
DX400/DX8000 series, the [Set Thin Provisioning Pool Parameters]
function cannot be executed.
• When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, Thin Provisioning Pools to which the thresholds can be
set differ depending on the current user account.
- When logged on using a Total Administrator account, the thresholds
of all the Thin Provisioning Pools that are assigned to Resource
Domains can be set.
- When logged on using a Resource Domain Administrator account,
the thresholds of only the Thin Provisioning Pools that are assigned
to the relevant Resource Domain and the Shared Resource can be
set.
• The following two methods are available for notification of a Thin
Provisioning Pool shortage.
- SNMP Trap
- ETERNUS SF Storage Cruiser
• If "Caution" or "Warning" is displayed in the status field of notification,
immediately expand disk drives.
If the thresholds of a Thin Provisioning Pool cannot be specified, a
message to that effect is displayed. Click the [OK] button to return to
the [Menu] screen.