Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
126
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Change the Assigned Domain of the iSCSI Host, and click the [Set] button.
The "Host Table information (Host Table number and Host Table name (if the name is
registered))" for the relevant iSCSI Host is displayed in the iSCSI Host List.
■ To set using [Set Range]
(1)Enter the first and last Host Table numbers.
(2)Select the domain to assign the specified range of the Host Tables from the list box.
(3)Click the [Execute] button.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
• If logged on using a user account that does not support the "Host
Settings - Open", the [iSCSI Host] link is not displayed.
• If there is no iSCSI Host registered in the ETERNUS DX400/
DX8000 series that can be assigned to domains, the [Suppress
Function] screen appears. Click the [OK] button to return to the
[Assign Resources (Select Resource)] screen.
If the [Execute] button is clicked in the following conditions, an error
screen appears.
• Both or one of the "From: Host Table#" or "To: Host Table#" field
is blank
• Characters other than hexadecim al numbers ar e specified in the
"From: Host Table#" or "To: Host Table#" field
• There are no iSCSI Hosts where the Assigned Domain can be
changed in the range specified by the "From: Host Table#" and
"To: Host Table#"