Filter
Top Products
Chapter 6 Settings Menu
> 6.3 Advanced Copy Settings
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
477
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Select the setting item for the remote device.
■ When selecting "Receive" for usage;
Click the [Execute] button.
■ When selecting "Send" for usage;
• When adding REC Disk Buffers, click the [Add] button.
• When deleting REC Disk Buffers, select REC Disk Buffers to be deleted (multiple
selections can be made), and click the [Delete] button.
• When REC Disk Buffers are not added or deleted, click the [Execute] button.
Select the following items:
• Box ID (can be selected only when creating a new REC Buffer)
Selects the Remote Box ID which is remotely connected with the local device.
When creating a REC Buffer, [-] cannot be selected because [-] is used for initial
display.
• Size
Set the REC Buffer size to [128], [256], [512], [1024] or [2048] MB (unusable values are
not available for selection).
[-] is for initial display only and cannot be selected. When changing REC Buffer, the set
REC Buffer size is displayed as initial display.
• Usage
Select the purpose to use REC Buffer from [Send], [Receive].
[Unused] is for initial display only and cannot be selected. When changing REC Buffer,
the set usage is displayed as initial display.
• Forwarding interval (seconds)
Set the data forwarding interval to [1], [2], [4], [8], [15], [30], [45], [60], [75], [90 ] , [ 1 0 5 ] o r
[120] seconds (unusable values are not available for selection).
[-] is for initial display only and cannot be selected. When changing the REC Buffer, the
set forwarding interval is displayed as the initial display.
• Watch time (minutes)
Set the watch time from [0], [1], ..., [14], [15] (minutes). If the REC Buffer remains
overload for the specified time, the status of REC session will be automatically
changed to "HALT". When the "Watch time" is set to "0", the REC Buffer is not
monitored.
[-] is for initial display only and cannot be selected. When changing the REC Buffer, the
set watch time is displayed as the initial display.
List box is displayed only when an unused management group is
selected on the [Set REC Buffer (Initial)] screen.
To set REC Buffer unused, delete the REC Buffer.