Filter
Top Products
Chapter 8 Remote Support Menu
> 8.2 Set
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
635
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
8.2.3 Change Communication Environment Information
This function re-sets the environment setting information related to the REMCS functional opera-
tion.
Also, remote support setting information file (Settings of communication environment informa-
tion) created by using REMCS ESAT can be imported into the device. Recording the imported
remote support setting information file (Settings of communication environment information) into
the device simplifies the input operation for each device by the user.
The following explains the operating procedures of changing communication environment
information.
Procedure
1 Click [Change Communication Environment Information] under the Set in the
[Remote Support] menu.
→ The [Change Communication Environment Information (Initial)] screen appears.
Refer to "Communication Environment information", "Detailed Settings Information",
and "Timer Information" in
"A.36 Set Remote Support" (page 802) for screen details.
• A remote support target device should be set up by the [Set Remote
Support] function before the start of remote support. Refer to "A.36 Set
Remote Support" (page 802) for details about [Set Remote Support]
function.
• When logged on using a Resource Domain Administrator account, the
[Change Communication Environment Information] menu is not
displayed.
If the settings has not been performed using the [Set Remote
Support] function, this function cannot be used.