Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
340
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
The following explains the operating procedures of iSCSI Host.
The following settings are available.
• Add iSCSI Host (Retrieve iSCSI Host function used)
• Add iSCSI Host (Retrieve iSCSI Host function not used)
• Change iSCSI Host
• Delete iSCSI Host
These procedures are explained in the following sections.
5.4.3.1 Add iSCSI Host (Retrieve iSCSI Host function used)
This section explains procedures to add iSCSI Host using Retrieve iSCSI Host function.
Procedure
1 Click [Set iSCSI Host] under the Host Interface Management in the
[Configuration] menu.
→ The [Set iSCSI Host (Initial)] screen appears.
2 Click the [Retrieve iSCSI Host] link and collect iSCSI name.
→ The [Set iSCSI Host (Select Collected CA Port)] screen appears.
3 Select the CA Port to collect the iSCSI name from the list box and click the
[Collect] button.
→ The [Set iSCSI Host (Register Collected iSCSI Host)] screen appears.