Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
422
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
4 Click the [Set] button to register the changed LCU information.
→ The [Set LCU (Check Setting)] screen appears.
5 Click the [OK] button.
→ The [Set LCU (Updating Configuration Information)] screen appears. After the process
is successfully completed, the [Set LCU (Setting Result)] screen appears.
• When the host is connected with multiple ETERNUS DX8100/
DX8400/DX8700, the LCU that each device is managing cannot
use the same SSID. Make sure not to set the same SSID in any
device.
• The Remote Flag is displayed only when the RFCF(RBS) license
is registered. The RBS mode can be set for 2 LCUs. However, the
RBS mode cannot be set for LCUs #0x10 to #0x1F.
• In the following cases, an error screen appears.
- When the [OK] button is clicked without selecting OS type
- When the [OK] button is clicked after alphanumeric other than
0x0002-0x00FD is entered in SSID
- When the [OK] button is clicked after an already registered
value is entered in SSID