Filter
Top Products
Chapter 6 Settings Menu
> 6.3 Advanced Copy Settings
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
458
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• Response Time
Specify the response time between the local device and the remote device.
→ The [Set REC Priority (Initial)] screen appears.
4 Click the [Set] button.
→ The [Set REC Priority (Setting Check)] screen appears.
• If the Open Volumes and Mainframe Volumes coexist, select
Open Volume for "Volume Type".
• When the link speed is not a numerical value of 1 to 65535, an
error screen appears.
• If an error is detected in the path, the response time may not be
measured correctly.
• The specified settings are not updated in the ETERNUS DX400/
DX8000 series when the [OK] button is clicked. Make sure to
return to the [Set REC Priority (Initial)] screen and click the [Set]
button to apply the new settings.
When you click the [Refresh] button, response time is measured
again.