Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
178
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• Encrypted volumes cannot be directly converted to non-encrypted
volumes.
To convert an encrypted volume into a non-encrypted volume,
first backup the encrypted volume's data via the server, then
recreate the volume, without encryption, and restore the data to it.
Make sure that the [Create as an encrypted volume.] checkbox is
not selected when creating the new volume.
• Create the equal number of Snap Data volumes (SDV) and
generations per copy source volume when using SnapOPC+.
• Volume name can be omitted. Note that volume name cannot be
specified for the Mainframe volumes.
• Volume types that can be created differ depending on the RAID
level, enabled/disabled for the DVCF mode, and the volume
conditions, etc. in the selected RAID Group. On this screen, only
the available volume type is displayed.
• When "GS License" is not registered in the device, Mainframe
Volume, MVV Volume, and MVV Concatenated Volume cannot
be created.
• When "Advanced Copy License" is not registered in the device,
Snap Data Volume cannot be created.
• When the encryption mode is disabled, the encryption volume
cannot be created.
• Checking multiple "free" spaces and creating a volume is not
allowed.