Filter
Top Products
Chapter 3 Status Menu
> 3.6 Advanced Copy Status
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
73
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3.6 Advanced Copy Status
This displays the operating status of Advanced Copy functions such as Equivalent Copy (EC),
One Point Copy (OPC), and Remote Equivalent Copy (REC).
The following explains the procedures to display and check the operating status of Advanced
Copy.
Procedure
1 Click [Advanced Copy Status] in the [Status] menu.
→ The [Advanced Copy Status (Initial)] screen appears.
• To display the Advanced Copy status, register the Advanced Copy
License. The "Advanced Copy Status" is not available until the license
has been registered.
• When no remote device for Remote Advanced Copy is registered, a
message to that effect is displayed.
• When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, the displayed sessions differ depending on the current
user account.
- When logged on using a Total Administrator account, all the active
sessions in the ETERNUS DX400/DX8000 series are displayed.
- When logged on using a Resource Domain Administrator account,
active sessions that use a copy source or copy destination volume in
one of the following conditions are displayed:
• Volumes registered in the relevant Resource Domain
• Volumes in the Shared Resource
• Volumes that cannot be assigned to Resource Domains
(Mainframe Volumes)