Filter
Top Products
Appendix A Screen Details
> A.6 Advanced Copy Status
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
691
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• Generation
The generation information of the SnapOPC+ session (n/m) is displayed.
Clicking the [SID] link displays the session IDs for all the generations. However, when
[SnapOPC+] is not selected for [Type], or [Reserve] is displayed for [Status], [-] is displayed.
- n/m: Number of selected generation (1 – 8) / Total number of generations in the
SnapOPC+ session (1 – 8)
• Status
The status of the session is displayed.
- Reserve: Session ID is reserved
- Active: Operating normally
- Error: Interruption due to error
• Error Code
The error code of the session is displayed in 0x00 – 0xFF (hexadecimal).
However, when the [Status] is [Reserve], the field is blank.
• Phase
Operation status of the session is displayed.
However, when the [Status] is [Reserve], the field is blank. In other cases, it is shown as
follows.
- QOPC
• No Pair
Duplicated pair of QOPC source and QOPC destination is not yet set up
• Tracking & Copy
Performing QOPC, or recording the information of the updated parts after the copy has
started
• Tracking
Recording only the information of the updated parts after the QOPC has been
completed
• Copying
After stopping recording the information of the updated parts, QOPC is copying the
parts
- MON
• Copying: Copy is in progress
- OPC, SOPC, SOPC+
• [-] (hyphen) is displayed
Since OPC session, SOPC session, SOPC+ session, and the monitoring session only
operate for copy, [-] (hyphen) is displayed here.
• Time sec.
The elapsed time from starting the session is displayed. (unit: seconds)
However, when the [Status] is [Reserve], the field is blank.
• Volume Type
The type of the volume (Open, Mainframe) to be copied in the session is displayed.
For monitoring session, [Open] is displayed.
However, when the [Status] is [Reserve], the field is blank.
Only "Open Volume" is a target for QOPC (QuickOPC), S OPC
(SnapOPC), and SOPC+ (SnapOPC+).