Filter
Top Products
Chapter 6 Settings Menu
> 6.2 Sub System Parameter
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
453
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Click the [OK] button.
→ The [Set Sub System Parameters (Updating Configuration Information)] screen
appears, and when the operation completes successfully, the [Set Sub System
Parameters (Setting Result)] screen appears.
4 Click the [OK] button.
→ Returns to the [Menu] screen.
End of procedure
• Only the [Disable Load Balance], [The copy between Resource
Domains is permitted], and [Reject INQUIRY from Unauthorized
Host] sub system parameters can be changed. Other sub system
parameters will not be displayed.
• When [Disable Load Balance] is checked, the load balance will be
disabled to all servers connected to the device. If an overload
occurs in this state, the overload response sense is not returned
to all servers including HP-UX.
• [Disable Load Balance] is not related to the load balance using
the Multipath Driver. The load balance using the Multipath Driver
does not operate together with Enabled/Disabled of the [Disable
Load Balance].