Filter
Top Products
Chapter 6 Settings Menu
> 6.8 Others
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
592
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 Check and change the following items, and click the [Set] button.
• IP Address (Required)
• Subnet Mask (Required)
• Gateway
• Allow same subnet access
• DNS Settings
• IP Access Settings
• Service Settings
→ The [Set IP Address for USER Port (Setting Check)] screen appears.
■ Supplemental remarks
• To allow access from the same subnet as the storage system:
Set the "Allow same subnet access?" item in the "Network Settings" field to "Yes".
• To allow access from a different subnet to that of the storage system:
Set the target "Network Address" and "Subnet Mask" in the "IP Access Settings" field.
(Example)
- To allow access from an entire subnet, specify the base network address and
subnet mask.
Network address: 10.20.30.0
Subnet Mask: 255.255.255.0
- To allow access from a particular client, specify its IP address and subnet mask.
Network address: 10.20.30.40
Subnet Mask: 255.255.255.0