Filter
Top Products
Chapter 8 Remote Support Menu
> 8.3 Operation
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
640
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 After setting the following items, click the [Set] button.
• Sending method
Set Valid/Invalid of [Automatic Sending Log].
If [Automatic Sending Log] is set to [Valid], the device internal log is automatically sent
to the REMCS center when an error occurs in the device.
• Periodic Sending Log
Set Valid/Invalid of [Periodic Sending Log].
When this is set to [Valid], an internal log of the device is automatically sent to the
REMCS center, according to the periodic sending schedule.
If [Valid] is selected, it is also necessary to set the time and cycle in [Periodic Sending
Log].
→ The [Sending Log (Check Setting)] screen appears.
3 Click the [OK] button to execute the process.
→ The [Sending Log (Setting Result)] screen appears.
If time is not input or the input value is wrong, an error screen
appears.