Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
227
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Click the [Menu] button.
→ Returns to the [Menu] screen.
End of procedure
5.2.13.2 Stop Migration
Procedure
1 Click [Progress of RAID Migration] under the RAID Management (or Thin
Provisioning Management) in the [Configuration] menu.
→ The [Progress of RAID Migration (Initial)] screen appears.
2 Select the migration session to delete, and click the [Delete] button.
Migration of any status can be deleted.
→ The [Progress of RAID Migration (Deletion Check)] screen appears.
In order to recover normal status (the status before failure), the
configuration information of the ETERNUS DX400/DX8000 series
may be needed. After RAID Migration has been completed, use the
[Export Configuration] function to get the configuration information.
When the device is busy (retrieving progress data) or when migration
is not performed, a message to that effect is displayed without
showing the initial screen.
When the status is busy, wait until processing is done. When the
progress data is retrieved, the [Progress of RAID Migration (Initial)]
screen appears.
When migration is not performed, click the [OK] button to return to
the [Menu] screen.