Filter
Top Products
Chapter 6 Settings Menu
> 6.6 Remote Advanced Copy Configuration
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
568
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• Only adaptor configuration file saved by the following functions
can be specified here:
- ETERNUS DX400/DX8000 series: the [Export Advanced
Copy Information] function
- ETERNUS4000, ETERNUS8000: the [Expor t Ad vanced Copy
Information] function
- ETERNUS6000: the [Export FCRA Information] function
• When jumping from the [Storage System (G et Current Info)]
screen to this screen in Step 2, an error screen appears if the
Advanced Copy configuration file of the Local Device is selected.
• When 17 devices have already been registered, no more devices
can be added.
• If an already registered device is registered again using a Upload
Adaptor Information, adaptor configuration will be overwritten.
When paths have already been created, all changed RA port path
configuration is deleted if the mode (Initiator/Target) (*1) is
reversed. Similarly, if the number of RA ports is reduced, path
configuration for the deleted ports is also deleted. For example, if
a 4-port configuration is changed to a 2-port configuration, the
port#0 and port#1 path configuration is retained, while the port#2
and port#3 path configuration is deleted.
*1: ETERNUS6000 only.
• If the [Set] button is clicked when no file has been selected, an
error screen appears error screen appears.
When the adaptor information read from the file has already been
registered, an update is performed instead of a new registration.
When the update process is performed, clicking the [Set] button
displays the [Create Advanced Copy Information (Check Updating
Device)] screen.