Filter
Top Products
Chapter 6 Settings Menu
> 6.3 Advanced Copy Settings
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
496
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Procedure
1 Click [Set Advanced Copy Event Notification] under the Advanced Copy
Settings in the [Settings] menu.
→ The [Set Advanced Copy Event Notification (Initial)] screen appears.
2 Select "Notify" or "Not notify" for each item, and click the [Set] button.
→ The [Set Advanced Copy Event Notification (Check Setting)] screen appears.
■ Default Advanced Copy Event notification values
• Copy related menus other than [Register Advanced Copy License] is
not available until the license has been registered.
• This setting is applied over the whole device (ETERNUS DX400/
DX8000 series). Reporting of events for specific paths only is not
possible.
• When setting REC Advanced Copy Event notification, the copy source
and copy destination devices must both be set to either "Notify" or "Not
notify".
• When logged on using a Resource Domain Administrator account, the
[Set Advanced Copy Event Notification] menu is not displayed.
Remote Path Error
REMCS Notify
SNMP Notify
Host Sense Notify
REC Buffer Halt
Remote Path Error Overload Error
REMCS Notify Notify Notify
SNMP Notify Notify Notify