Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
203
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
4 Click the [OK] button to start the encryption process.
→ The [Convert Encryption Volume (Convert Startup Progress)] screen appears.
When the process is completed, the [Convert Encryption Volume (Startup Results)] screen
appears.
• Only normal status volumes can be encrypted. If a volume cannot
be encrypted, a checkbox is not displayed.
• [- (Non-encrypted volume)] is displayed for an encrypting volume
until the operation is completed. Checkboxes are not displayed
for encrypting volumes.
• The same Logical Volume numbers apply for both Open volumes
and Mainframe volumes. When encrypting volumes by the
[Range selection] method, pay attention to the radio button
setting.
• When clicking the [Set] button in the following cases, an error
screen appears.
- When the [Individual selection] is selected, and no volumes
are selected
- When the [Range] is selected, and nothing is entered in either
or both the From or To fields
- When the [Range] is selected, and something other than
hexadecimal numbers are entered in either or both the From
or To fields
- When the [Range] is selected, and there are no volumes that
can be encrypted between the range specified with the From
and To fields