Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
189
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
7 Click the [OK] button.
→ The [Set Snap Data Pool (Check SDPV Creation Progress)] screen appears.
When creation completes, formatting starts.
The [Set Snap Data Pool (SDPV Creation Result)] screen appears after completing the
starting format process.
8 Click the [OK] button.
→ Returns to the [Set Snap Data Pool (SDPV List)] screen.
9 Click the [Menu] button.
→ Returns to the [Menu] screen.
End of procedure
If creating an SDPV that exceeds the available capacity is attempted,
an error screen appears.
• If any errors occur during the SDPV creation process, a message
to that effect is displayed.
• After creating SDPV is complete, the new volumes are
automatically formatted. When exceeding the maximum capacity
of volumes that can be formatted concurrently, a message to that
effect appears. Wait until the current format process is complete,
and then format the SDPVs that failed to format. When SDPVs
fail to format, "Error" or "Not formatted" is displayed as the result
of the format starting process.
Progress of volume format can be checked using the [Volume List] or
the [RAID Group List] function.