Filter
Top Products
Chapter 6 Settings Menu
> 6.3 Advanced Copy Settings
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
486
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 Specify the REC Disk Buffer information, and click the [Set] button.
Set the following to create REC Disk Buffers.
• RAID Group Name
Input the name of the REC Disk Buffer to be created.
• Controlling CM
Select the Controlling CM-CPU for the REC Disk Buffer to be created.
• Encryption
Select encrypt (ON) or not encrypt (OFF) for the REC Disk Buffer to be created.
The "Encryption" is displayed only when the encryption function and the encryption
mode have been enabled.
→ The [Create REC Disk Buffer (Select Disk Drive)] screen appears.
■ REC Disk Buffer Specifications
The specifications for REC Disk Buffers are listed below.
RAID level Number of disk drives Disk drive type
RAID1+0(2+2) or
RAID1+0(4+4)
4 or 8 Fibre Channel disk drive or
SSD
An error screen appears when clicking the [Set] button in the
following conditions:
• When inputting characters other than the ASCII code (0x20 –
0x7E) as the RAID Group Name
• When inputting the existing RAID Group Name