Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
198
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Procedure
1 Click [Rename Logical Volume] under the RAID Management (or Thin
Provisioning Management
) in the [Configuration] menu.
→ The [Rename Logical Volume (Change)] screen appears.
2 Enter the new volume name in the "Name" text box for the target volume, and
click the [Set] button.
→ The [Rename Logical Volume (Check)] screen appears.
In the following conditions, volume names cannot be changed. When
a message to that effect appears, click the [OK ] b u t t o n t o r e t u r n t o
the [Menu] screen.
• When there are no volumes registered in the ETERNUS DX400/
DX8000 series
• When the volume types registered in the ETERNUS DX400/
DX8000 series do not support the [Rename Logical Volume]
function
If clicking the [Jump to Page], [Next], [Prev], or [Set] button in the
following conditions, an error screen appears. This function performs
the error checking for each page of the Volume List. Volumes to be
renamed are displayed with a yellow background.
• When entering characters other than ASCII code (0x20 – 0x7E)
• When entering the existing volume name