Filter
Top Products
Appendix A Screen Details
> A.39 Set RADIUS Authentication
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
815
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
- Do not use Internal Authentication:
Even when communication with the RADIUS server fails, or communication with the
RADIUS server succeeds but authentication fails, internal authentication is not performed.
■ Primary Server (required) / Secondary Server (can be omitted)
● Setting item
• IP Address
Set the IP Address of the RADIUS server with up to three numeric characters (0 – 255). T h e
initial status is blank.
• Port No.
Input the port number (1 – 65535) that the RADIUS server uses with up to five characters.
The default setting is "1812".
• Authentication Type
Select the authentication method for the RADIUS Authentication from the list box.
- CHAP (Default)
- PAP
• Shared Secret
Input the same Shared Secret as the RADIUS server with up to 32 ASCII code characters
(0x20 – 0x7E). The initial status is blank.
• Timeout (Second)
Select the total time for waiting for a response from the RADIUS server. E T E R N U S D X 4 0 0 /
DX8000 series retries authentication during the specified time (seconds), and if there is no
response in the specific time, regard the situation as network error. The default s e t t i n g i s " 3 0
second".
If RADIUS Authentication fails when selecting "Do not use Internal
Authentication" for Authentication Error Recovery, logging on to
ETERNUSmgr will not be available.
Specifying the RADIUS server by domain name is not allowed.