Filter
Top Products
Appendix A Screen Details
> A.19 Set Host World Wide Name(s)
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
757
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
- Default: Name:
The [Default] Host Response is displayed. If the Host Response name is registered, its
name is also displayed in the list box.
- Host Response (Number: Name):
A Host Response identification number is displayed. If the Host Response name is
registered, its name is also displayed in the list box.
(Number = 0x01 – 0xFF)
■ Add WWN
● Setting item
• Name
In the text box, enter the name to assign for the Host Table within 1 6 c h a r a c t e r s i n A S C I I c o d e
(0x20
– 0x7E). Host Table name can be omitted.
• Radio button
Select a method to add WWN by radio button.
- Select:
Select the WWN to add from the list of collectable WWNs for a specified CA (Default).
- Manual Input:
Directly enter the WWN to add.
• Select
- CA
The list of FC-CA Ports which are installed in the ETERNUS DX400/DX8000 series and
available for use is displayed in the list b o x . S e l e c t t h e F C - C A P o r t f o r w h i c h t o c o l l e c t a
WWN from the list box.
- WWN
Click the [Collect] button after specifying CA, and then the collected WWN list is displayed
in the list box. Select a WWN to add from the list box.
- [Collect] button
Collects the list of WWNs recognized by the selected FC-CA Port.
• When Resource Domains are not registered, or when logged on using a
Resource Domain Administrator account, the [Resource Domain No.]
and the [Resource Domain Name] are not displayed.
• When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, only the Host Responses that are assigned to the same
Resource Domains as the WWN, and Host Responses that are
assigned to the Shared Resource, are displayed in the list box as
options for Host Response.
The same Host Table name as the existing Fibre Channel card cannot
be specified.