Filter
Top Products
Chapter 3 Status Menu
> 3.4 Thin Provisioning Pool List
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
66
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3.4 Thin Provisioning Pool List
This function displays a list and configuration information of Thin Provisioning Pools registered in
the
ETERNUS DX400/DX8000 series, and a list of Virtual Logical Volumes in the Thin Provision-
ing Pool.
This function facilitates the display of the status of each Thin Provisioning Pool and the RAID
Groups configuring each Thin Provisioning Pool, aiding system administrators and maintenance
engineers in their work.
The following explains procedures to display the Thin Provisioning Pool List.
• When displaying the Thin Provisioning Pool l i s t , r e g i s t e r t h e T h i n
Provisioning Pool license. The [Thin Provisioning Pool List] menu will be
available after registering the license.
• If "Caution" or "Warning" is displayed in the Status item of the Notice
field in the Thin Provisioning Pool List, immediately expand disk drives.
• When no Thin Provisioning Pool is registered in the device, a message
to that effect is displayed. Click the [OK] button to return to the [Menu]
screen.
• When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, the displayed Thin Provisioning Pools differ depending
on the current user account.
- When logge d on using a Total Administrator acco unt, a ll the Thin
Provisioning Pools that are assigned to the Resource Domains are
displayed.
- When logged on using a Resource Domain Administrator account,
only the Thin Provisioning Pools that are assigned to the relevant
Resource Domain, and only the Thin Provisioning Pools that are
assigned to the Shared Resource, are displayed.
• It is possible to check the Rebuilding/Copyback progress and detailed
information for disk drives from the [Thin Provisioning Pool List (RAID
Group List in the Pool)] screen for the Thin Provisioning Pool, as in the
case of the [RAID Group List] function.
• Use the [Volume List] function to display all the Logical Volumes
registered in the ETERNUS DX400/DX8000 series.
• Use the [RAID Group List] function to display all the RAID Groups
registered in the ETERNUS DX400/DX8000 series.