Filter
Top Products
Chapter 3 Status Menu
> 3.3 RAID Group List
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
61
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Procedure
1 Click [RAID Group List] in the [Status] menu.
→ The [RAID Group List (Initial)] screen appears.
Refer to "A.3.1 RAID Group List (Initial) Screen" (page 673) for screen details.
The following items can be checked:
• RAID Group No.
RAID Group number
• RAID Group Name
RAID Group name
• RAID Level
RAID level of the RAID Group
• Status
Status of the RAID Group
• Controlling CM
Controlling CM-CPU of the RAID Group
• Capacity (MB)
Capacity of the RAID Group
• DVCF Mode
DVCF mode (ON/OFF) of the RAID Group
• Usage
Volume type of the RAID Group
• Resource Domain No.
The number of the Resource Domain to which the target RAID Group is assigned (*1)
• Resource Domain Name
The name of the Resource Domain to which the target RAID Group is assigned (*1)
• TPP No.
The number of the Thin Provisioning Pool where the target RAID Group is registered
• TPP Name
The name of the Thin Provisioning Pool where the target RAID Group is registered
*1: Resource Domain is displayed when logged on the ETERNUS DX400/DX8000 series, in
which the Resource Domains have been registered, using a Total Administrator account.