Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
320
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
When clicking the [Set] button in the following conditions, an error
screen appears.
• When the required setting items (IP Address or Subnet Mask) are
not set.
• When characters other than the numbers (0 to 255) are entered in
the IP Address, Subnet Mask, or Gateway.
• When a value exceeding the maximum value is set in the IP
Address or Gateway.
• When "255.255.255.255" is entered in the IP Address, Subnet
Mask, or Gateway.
• When the IP Address is the same as the network address.
• When the IP Address is the same as the broadcast address.
• When the Gateway has been set, and the IP Address and the
Gateway address are the same.
• When the Gateway has been set, and the IP Address and the
Gateway are not in the same subnet.
• When the same Alias Name is registered to t w o o r m o r e i S C S I -
RA Ports.
• When the CHAP is ON, and the User Name is 64 characters or
longer.
• When the CHAP is ON, and the User Name includes characters
other than 0x20 – 0x7E of ACSII code (alphanumeric characters
and symbols).
• When the CHAP is ON, and the Current Password is different
from the data in the device information.
• When the CHAP is ON, and the New Password and/or New
Password (Re-enter) include characters other than 0x20 – 0x7E
of ASCII code (alphanumeric characters and symbols).
• When the CHAP is ON, and the New Password and the New
Password (Re-enter) are 11 characters or shorter, or 33
characters or longer.
• When the CHAP is ON, and the New Password and the New
Password (Re-enter) are not the same.