Filter
Top Products
Appendix A Screen Details
> A.14 Set Thin Provisioning Pool Parameters
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
735
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.14 Set Thin Provisioning Pool Parameters
A.14.1 Set Thin Provisioning Pool Parameters (Notification Setting) Screen
Set the thresholds of Thin Provisioning Pools on this screen.
When Resource Domains are registered in the ETERNUS DX400/DX8000 series, the displayed
Thin Provisioning Pools differ depending on the current user account.
When logged on using a Total Administrator account, all the Thin Provisioning Pools that are
assigned to Resource Domains are displayed. When logged on using a Resource Domain
Administrator account, only the Thin Provisioning Pools that are assigned to the relevant
Resource Domain, and only the Thin Provisioning Pools that are
assigned to the Shared
Resource
, are displayed.
When Resource Domains are not registered, all the Thin Provisioning Pools registered in the
ETERNUS DX400/DX8000 series are displayed.
Refer to "A.4.1 Thin Provisioning Pool List (Pool List) Screen" (page 676) for details about Thin
Provisioning Pool List.
■ Manual setting
● Setting item
• Notice (%)
- Warning
Input the Warning (high) thresholds of Thin Provisioning Pool in percent figures (%) in the
text box (required).
Specify the threshold between 5 – 99 (%). The default setting is "90 (%)".
- Caution
Input the Warning (low) thresholds of Thin Provisioning Pool in percent figures (%) in the
text box (can be omitted).
Specify the threshold between 5 – 80 (%). The default setting is "75 (%)".
When no thresholds are specified for the Thin Provisioning Pool, delete the parameters for
the relevant Thin Provisioning Pool.
A smaller value than the Caution threshold of the target Thin
Provisioning Pool is not allowed.
A larger value than the Warning thresh old of the target Thin
Provisioning Pool is not allowed.