Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
242
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
This section explains procedures to create Hot Spare.
Procedure
1 Click [Create Hot Spare] under the RAID Management (or Thin Provisioning
Management
) in the [Configuration] menu.
→ The [Create Hot Spare (Initial)] screen appears.
2 Select the disk(s) to be created as hot spare, and click the [Set] button.
Click the [Move] button to display the Expansion Rack screen. Select the Expansion Rack
disk(s) using the same procedure as for the Base Rack.
→ The [Create Hot Spare (Check Setting)] screen appears.
If there is no disk available for creating a hot spare, a message to
that effect appears. Click the [OK] button to return to the [ M e n u ]
screen.
In order to create a hot spare disk, add a disk drive before executing
the [Create Hot Spare] function again.
When the [Set] button is clicked without selecting a disk to be
created as hot spare, an error screen appears.