Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
435
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 Select the CA Port to copy IOA Mapping (copy source), and click the [Copy]
button.
→ The [Set IOA Mapping (Copy Destination CA Port Selection)] screen appears.
3 Select copy destination CA Port(s) (multiple selections can be made), and click
the [Paste] button.
The copy source CA Port is displayed with a yellow background.
→ The [Set IOA Mapping (Copy Check)] screen appears.
In the following cases, an error occurs and a message to that effect
appears. Click [OK] button to return to the [Menu] screen.
• When no LCU is registered
• When no Mainframe Volume or MVV Volume is created in the
ETERNUS DX8100/DX8400/DX8700
• When no OCLINK or FCLINK is installed
In the following cases, an error screen appears.
• When the [Copy] button is clicked without selecting CA Port
• When the [Copy] button is clicked with a CA Port selected, but
there is no copy destination CA Port for the copy source CA Port.